How to use iCare 140 Vape pen kit correctly
a) How to assemble:
Screw the IC 1.1ohm Head onto the top cap tightly and then screw the top cap with atomizer head into the tank.
b) How to fill e-liquid:
1. First unscrew the top cap off the tank;
2. Then slowly refill the e-liquid into the tank;
3. Finally screw the top cap with atomizer head into the tank again.
Note:
1. Please don't fill beyond the Max mark to avoid overflow.
2. Please first drip a few drops of e-liquid directly into the coil to make it fully saturated before first use.
About Power on/off:
Press the button 5 times in quick succession within 1.5 seconds, the white button light will flash 3 times to show the iCare 140 is ready to use. In the same way, the iCare 140 can also be turned off.
About Vaping:
When the device is powered on, long press the button to take a puff.
About Charging:
Charge the iCare 140 by connecting it with 0.5A wall adapter or computer via USB cable. The white button light turns on when the device is charging. When the device is fully charged, the light flashes 20 times and then goes out.
About Properties and Protections:
Atomizer Protection: Each time when vaping time exceeds 10 seconds, the button light flashes 8 times and the output cuts off automatically.
Short Circuit Protection: If short circuit occurs before vaping, the button light will flash 3 times quickly and the output cuts off automatically when you start to vape; if short circuit occurs during vaping, the button light will flash 3 times slowly.
Low Voltage Protection: When the voltage of the device is lower than 3.3V, the button light flashes 10 times and there will be no output. Charge the device to reactivate it.
Resistance Detect: If the output load resistance is lower than 1.0ohm, there will be no output when you press the button to vape.
Warnings
1. Please keep out of reach of children.
2. This product is not recommended for use by young people, non-smokers, pregnant or breast-feeding women, or persons who are allergic/sensitive to nicotine.
Contra-indication
1. Do not attempt to repair the product by yourself as damage or personal injury may occur.
2. Do not leave the product in high temperature or damp conditions, otherwise it may be damaged.
3. Do not use this product for other purposes except only for vaping and don't swallow the e-liquid.
Possible Adverse Effects
1. This product may be hazardous to health and contains nicotine which is addictive.
2. For people with adverse reaction after using this product, it is recommended to use the e-liquid with lower nicotine content or no nicotine.
If you have any questions, you can contact Eleaf official atuhorized online store, they will solve your problems quickly.
No comments