Thursday, May 18, 2017

How to use iCare 140 Vape pen kit correctly

About iCare 140 Assembling: 
a) How to assemble:
Screw the IC 1.1ohm Head onto the top cap tightly and then screw the top cap with atomizer head into the tank.
b) How to fill e-liquid:
1. First unscrew the top cap off the tank;
2. Then slowly refill the e-liquid into the tank;
3. Finally screw the top cap with atomizer head into the tank again.
1. Please don't fill beyond the Max mark to avoid overflow. 
2. Please first drip a few drops of e-liquid directly into the coil to make it fully saturated before first use.

About Power on/off: 
Press the button 5 times in quick succession within 1.5 seconds, the white button light will flash 3 times to show the iCare 140 is ready to use. In the same way, the iCare 140 can also be turned off. 

About Vaping: 
When the device is powered on, long press the button to take a puff. 

About Charging: 
Charge the iCare 140 by connecting it with 0.5A wall adapter or computer via USB cable. The white button light turns on when the device is charging. When the device is fully charged, the light flashes 20 times and then goes out. 

About Properties and Protections: 
Atomizer Protection: Each time when vaping time exceeds 10 seconds, the button light flashes 8 times and the output cuts off automatically. 
Short Circuit Protection: If short circuit occurs before vaping, the button light will flash 3 times quickly and the output cuts off automatically when you start to vape; if short circuit occurs during vaping, the button light will flash 3 times slowly. 
Low Voltage Protection: When the voltage of the device is lower than 3.3V, the button light flashes 10 times and there will be no output. Charge the device to reactivate it. 
Resistance Detect: If the output load resistance is lower than 1.0ohm, there will be no output when you press the button to vape. 

1. Please keep out of reach of children. 
2. This product is not recommended for use by young people, non-smokers, pregnant or breast-feeding women, or persons who are allergic/sensitive to nicotine.

1. Do not attempt to repair the product by yourself as damage or personal injury may occur.
2. Do not leave the product in high temperature or damp conditions, otherwise it may be damaged. 
3. Do not use this product for other purposes except only for vaping and don't swallow the e-liquid. 

Possible Adverse Effects 
1. This product may be hazardous to health and contains nicotine which is addictive. 
2. For people with adverse reaction after using this product, it is recommended to use the e-liquid with lower nicotine content or no nicotine.

If you have any questions, you can contact Eleaf official atuhorized online store, they will solve your problems quickly.

Wednesday, February 22, 2017

Eleaf Released A New QC 200W Mod

Good news ! Following the iStick TC200W Mod, Eleaf Released Another 200W Box Mod , The iStick QC 200W Box Mod . Here is some information about this mod.

The iStick QC 200W comes with a massive 5000mAh built-in battery and has a powerful 50A/200W maximum output. Stylish, sustainable and powerful, the iStick QC 200W also features a cell balancing trickle charge system and a 1.5A quick charge capability when using the Avatar Quick Charger. The innovative RC adapter (optional accessory) will convert the iStick QC 200W's 510 connection into a USB output for Power bank mode when necessary.
It is in stock at Eleaf Official Authorized Online Store . Only $38.90 you can get one package .

Thursday, February 2, 2017

About 30W Eleaf iStick Mod Battery

The 30W iStick Battery Mod can reach 30W max output wattage. The spring 510 connector ensures better connection with the atomizer. iSitck 30W can also support sub ohm coil (Min 0.4ohm). Full battery protection system gives you the best vaping experience.

Tuesday, January 10, 2017

About Kanger SUBVOD Starter Kit

The Kanger SUBVOD Starter Kit is a complete, easy to use, entry level set-up that features a 1300mAh Kanger SUBVOD Battery, a Kanger TOPTANK Nano, Kanger's new SSOCC coil, and essential accessories that make for a perfect starter and travel kit.

The Kanger SUBVOD Starter Kit is based upon the popular EVOD Battery design. The Kanger SUBVOD provides a sub-ohm experience while maintaining the popular pen-style form. The TOPTANK Nano is capable of holding 3.2ml of liquid while featuring an airflow control valve, and is easily filled using the top-fill design. Can be bottom filled as well. The Kanger SUBVOD battery is designed for ease of use, handling, and portability, featuring an integrated 1300mAh battery chargeable via Micro USB cable along with single button operation.

This kit is in stock at KangerTech Official Authorized Online Store, , you can know more information from there !

Monday, January 2, 2017

Wismec based vape designer JayBo

Wismec based vape designer JayBo have teamed up on several successful electronic cigarette designs. The previous version of JayBo's Wismec Reuleaux RX200 200 watt Box mod iS getting very popular . If anything characterizes the designs I would say that the intent and result is to make advanced vaping easy, comfortable and reliable. The RX 200 is a proven commodity on the vaping business .Hope more successful box mod coming !

Wednesday, December 28, 2016

Order Eleaf ASTER Total Here !

Eleaf's Aster Total Starter Kit is an all in one system that utilizes the ergonomic and compact chassis of the Aster platform while integrating a rangy 3.2 milliliter top filled tank, a 1600 mAh integrated battery, and the flavorful low wattage IC coil structure.
It is in stock at Eleaf iStick official Authorized Online Store, only need $26.90 .

Wednesday, December 21, 2016

About Eleaf iStick Pico Dual TC200W Box Mod

The New Eleaf iStick Pico Dual TC200W Box Mod is powered by dual 18650 batteries which can fire up to 200W maximum output.
It can preorder at Eleaf iStick Official Authorized Online Store now, only need $28.90 .